Duplicate Pen drives...

Hi,

For every quality product, you will get a duplicate one. When some duplicated products works better and also come in cheap rates, those products will surely have demand. And some duplicated products are the worst ones which is just a waste of money which cheats the customer.

In this post I am pointing out the duplicate model of a pen drive.

Location : Karol Bagh Market, Delhi, India.

While I was walking through the Karol Bagh market, I noticed some of street vendors displaying a pack of Kingston pen drive.
The image shows the pendrive that they displayed.

Its written "Kingston", the company name & 64GB the storage space on the body of the pen drive.

                                      

Company Name of Pen drive : Kingston
Storage : 64GB
Price : Rs 1000/-   
Seller : Street Vendors

Throughout the market a lot of people were buying the pen drive which is at a cheaper rate. I went to them.
I asked them for the bill, they said it was a smuggled product, so it does not have any bill. Even if I rejected to buy, they followed me to make me buy. On bargaining they brought the price of that 64GB pen drive down to Rs 200/-. I understood that there was some fault or cheating in it. Never a 64GB pen drive's cost will come down like this because even a 16GB Pen drive costs around Rs 500 now. But the pen drive was company packed. I decided to buy it. I was sure it was not 64 GB. But I was eager to know what was all behind that pen drive.

I bought it for Rs 200. I came home & opened it.

 This is what contains inside the pen drive.

Just a plastic fixed with the body of the pen drive.

Total parts of the pen drive

A duplicate pen drive sold in market, cheating the customers and making a bad name for a branded company. A lot of people are getting cheated like this. I saw people who were buying it for prices varying from Rs 1000 to Rs 2000. The people sell this product in front of the police patrolling inside the market. So there will be no use in registering a complaint.

Money lost is lost. I spend Rs 200 to buy it, thus getting this valuable information and I decided to share this information to prevent you from getting cheated. Please make use of this information.

Please share this information to your friends and create awareness about the cheating, and tell them to buy the original product producing the receipt.

Always Buy Original Products...

Thank God

RAM

Recycle Electric Charge; SAVE ENERGY

Hi all,

 I am proud to share before you a small successful experiment done by me with a Mosquito Bat.
This experiment results in saving energy by sharing of energy. A recycle process.

The image is of a mosquito bat.
This bat is used to kill mosquitoes with the electric charge. The bat should be charged before use and it takes  a long time for charging.
When the switch is ON electric charge flows through the mesh of the bat. There are two layers of mesh in this bat. Thick outer layer and Thin Inner layer. Mosquito dies if mosquito touches both the layer at the same time.

But mosquito won't come and sit on the bat. We usually wave the bat to hit the mosquito.
So the time except hitting the mosquito when the switch is ON, will have loss of charge.

My Aim :- Save Energy
  This is a simple thing to do and we can save energy.

What I did?
 The charge that flows through the mesh when the switch is ON is huge to kill an insect like mosquito. Only a small amount of charge is required to kill a mosquito. So I connected two wires from the mesh to the charging point of the bat. Now the bat can be used for killing mosquito, at the same time the bat gets recharged when the switch is ON. Giving the connection from mesh to charging point reduces the power flowing through mesh but its enough to kill a mosquito.

 The photograph below explains the experiment.

I took two wires and here in the picture I connected red wire to the outer layer of the mesh and blue wire to the inner layer of the mesh. Make sure that both wires touch only the respective layers.

This the charging point of the bat. I connected red wire to one point and blue wire to the other.

Now the connection looks like this.

Turn ON the switch and start attacking the mosquito.
Both red light and green light turns on at the same time.
Red light indicated by red arrow states that the charge is flowing through mesh.
Green light indicated by green arrow indicates the bat is getting charged.

This worked for me and I am successfully using this.
Advantage : Charge of the bat is extended by doing this method.

You also can also try this and save energy.

                                      Save ENERGY.

Please share this post if you like.

**NB: Make sure the connections are proper and insulated. Be careful while experimenting.
          Bat should be charged again once the power is low, but charge of bat is extended for some more time.

**NB: You can try this at your own risk. I will not be responsible for any damage.


Thank God,

RAM